韵祥影音首页

意大利Synthesis

 

 

 

 

                          

Metropolis
NYC200i   230W Dual Mono Integrated Amplifier

SYNTHESIS is proud to introduce a stereo tube amplifier incorporating the exceptional the sonic performance.
The NYC 200i provides a minimum of 460 watts (230W per channel), power output from 8, KT120's in Ultra-Linear (UL) - push/pull operation.
The NYC 200i features a newly designed custom output transformer designed to achieve highly delicate and precise sound with extraordinary musicality from tubes, but with the authority of the best transistor amplifier.

- Aluminium Knobs
Two 45mm CNC machined control knobs with integral soft light and laser etched indication segments.
- DC Powered tube heater
All tubes, except KT120, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.
- Output transformer
The Output transformer uses a double C-core Hi-Grade Iron-Silicon for superb frequency reproduction and bandwidth. With this newly designed custom output transformer unique to the NYC200i we are able to achieving highly delicate and precise sound reproduction faithful to the original recording.
- Mechanical chassis construction
The power supply and output transformers are held by an extremely rigid “H” structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes.
- Remote control
A superb wooden handmade case with soft button design, perfectly matching the aesthetics for the “Metropolis” series.
- Feet
Four CNC machined aluminium feet with an insert of natural rubber. The depth and form of these rubber feet is calculated to minimize the vibration of the amplifier in isolation from its surroundings.
- Fan
A 120mm fan provides a speed between 500 to 700 rpm which is controlled via the supplied adapter. This ULN (Ultra-Low-Noise) unit is tailor made for the serious enthusiast who demands super-slow running speeds and the utmost silence of operation.
- Bias control
The factory set fine bias control is microprocessor controlled to maintain the optimum settings. If required this can be adjusted without the use of an external voltmeter by use of an internally fitted display device.
- Dual mono Circuitry
A completely dual mono design minimises the crosstalk across channels. Power transformers use hi-grade iron silicon M0 and separate supplies with hi-grade selected capacitors to produce extremely low ripple levels. Independent to the mains transformer, each channel has a separate power supply guaranteeing a large reservoir of energy to meet the demands of the amplifier circuit and to maintain excellent interference immunity between channels.
- Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.
- Socket
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.
- Components
Components for the NYC 200i have been selected with great care throughout. Only the best available components are considered and all must undergo an exhaustive analysis of their sonic influence prior to final selection.
- Selected tubes
All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process and at the end of this, selects the perfect tubes which are matched for a perfect balance. 

                         

Metropolis
NYC175i 
  180W Dual Mono Integrated Amplifier
SYNTHESIS is proud to introduce a stereo tube amplifier incorporating the exceptional the sonic performance.
The NYC 175i provides a minimum of 360 watts (180W per channel), power output from 8, KT88/6550's in Ultra-Linear (UL) - push/pull operation.
The NYC 175i features a newly designed custom output transformer designed to achieve highly delicate and precise sound with extraordinary musicality from tubes, but with the authority of the best transistor amplifier.

- Aluminium Knobs
Two 45mm CNC machined control knobs with integral soft light and laser etched indication segments.
- DC Powered tube heater
All tubes, except KT88/6550, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.
- Output transformer
The Output transformer uses a double C-core Hi-Grade Iron-Silicon for superb frequency reproduction and bandwidth. With this newly designed custom output transformer unique to the NYC175i we are able to achieving highly delicate and precise sound reproduction faithful to the original recording.
- Mechanical chassis construction
The power supply and output transformers are held by an extremely rigid “H” structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes.
- Remote control
A superb wooden handmade case with soft button design, perfectly matching the aesthetics for the “Metropolis” series.
- Feet
Four CNC machined aluminium feet with an insert of natural rubber. The depth and form of these rubber feet is calculated to minimize the vibration of the amplifier in isolation from its surroundings.
- Fan
A 120mm fan provides a speed between 500 to 700 rpm which is controlled via the supplied adapter. This ULN (Ultra-Low-Noise) unit is tailor made for the serious enthusiast who demands super-slow running speeds and the utmost silence of operation.
- Bias control
The factory set fine bias control is microprocessor controlled to maintain the optimum settings. If required this can be adjusted without the use of an external voltmeter by use of an internally fitted display device.
- Dual mono Circuitry
A completely dual mono design minimises the crosstalk across channels. Power transformers use hi-grade iron silicon M0 and separate supplies with hi-grade selected capacitors to produce extremely low ripple levels. Independent to the mains transformer, each channel has a separate power supply guaranteeing a large reservoir of energy to meet the demands of the amplifier circuit and to maintain excellent interference immunity between channels.
- Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.
- Socket
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.
- Components
Components for the NYC 175i have been selected with great care throughout. Only the best available components are considered and all must undergo an exhaustive analysis of their sonic influence prior to final selection.
- Selected tubes
All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process and at the end of this, selects the perfect tubes which are matched for a perfect balance.
 

                          

Metropolis
NYC100i  
100W Dual Mono Integrated Amplifier

SYNTHESIS is proud to introduce a stereo tube amplifier incorporating the exceptional the sonic performance.
The NYC 100i provides a minimum of 200 watts (100W per channel), power output from 8, KT66's in Ultra-Linear (UL) - push/pull operation.
The NYC 100i features a newly designed custom output transformer designed to achieve highly delicate and precise sound with extraordinary musicality from tubes, but with the authority of the best transistor amplifier.

- Aluminium Knobs
Two 45mm CNC machined control knobs with integral soft light and laser etched indication segments.
- DC Powered tube heater
All tubes, except KT66, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.
- Output transformer
The Output transformer uses a double C-core Hi-Grade Iron-Silicon for superb frequency reproduction and bandwidth. With this newly designed custom output transformer unique to the NYC100i we are able to achieving highly delicate and precise sound reproduction faithful to the original recording.
- Mechanical chassis construction
The power supply and output transformers are held by an extremely rigid “H” structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes.
- Remote control
A superb wooden handmade case with soft button design, perfectly matching the aesthetics for the “Metropolis” series.
- Feet
Four CNC machined aluminium feet with an insert of natural rubber. The depth and form of these rubber feet is calculated to minimize the vibration of the amplifier in isolation from its surroundings.
- Fan
A 120mm fan provides a speed between 500 to 700 rpm which is controlled via micro. This ULN (Ultra-Low-Noise) unit is tailor made for the serious enthusiast who demands super-slow running speeds and the utmost silence of operation.
- Bias control
The factory set fine bias control is microprocessor controlled to maintain the optimum settings. If required this can be adjusted without the use of an external voltmeter by use of an internally fitted display device.
- Dual mono Circuitry
A completely dual mono design minimises the crosstalk across channels. Power transformers use hi-grade iron silicon M0 and separate supplies with hi-grade selected capacitors to produce extremely low ripple levels. Independent to the mains transformer, each channel has a separate power supply guaranteeing a large reservoir of energy to meet the demands of the amplifier circuit and to maintain excellent interference immunity between channels.
- Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.
- Socket
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.
- Components
Components for the NYC 100i have been selected with great care throughout. Only the best available components are considered and all must undergo an exhaustive analysis of their sonic influence prior to final selection.
- Selected tubes
All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process and at the end of this, selects the perfect tubes which are matched for a perfect balance. 

               

 

Action
A100Titan 
  100W Integrated Stereo Amplifier

Two models of stereo tube amplifiers with DAC's on board, guaranteeing exceptional sonic performance from any digital source. Made with the finest materials & advanced technology, this series is a sophisticated blend of research & experience. Designed without compromise for a rich sound & faithful music reproduction.
The A100Titan provides a minimum of 200 watts (100W per channel), power output from 8, KT66's in Ultra-Linear (UL) - push/pull operation.
The A100Titan features a newly designed custom output transformer resulting in a rich sound stage but with an authority that belies its 100Wpc.
 
FEATURES 

- USB & S/PDIF input
For the first time we include an onboard 24Bit 192KHz Wolfson DAC for a extraordinary listening experience. 

- DC Powered tube heater
All tubes, except KT66, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum. 

- Output transformer
The Output transformer uses a Hi-Grade Iron-Silicon for superb frequency reproduction & width. With this newly designed custom output transformer unique to the A100Titan we are able to achieving a highly delicate & precise sound reproduction faithful to the original recording. 

- Mechanical chassis construction
The power supply & output transformers are held by an extremely rigid “H” structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes. 

- Remote control
Featuring a superb CNC machined case it has a soft button design, perfectly matching the aesthetics for the “ACTION” series. 

- Feet
Four CNC machined aluminium feet with an insert of natural rubber. The depth & form of these rubber feet has been calculated to minimise vibrations of the amplifier in isolation from its surroundings. 

- Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.

- Sockets
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.

- Components
Components for the A100Titan have been selected with great care throughout. Only the best available components are considered & all must undergo an exhaustive analysis of their sonic influence prior to final selection. 

- Selected tubes
All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process & at the end of this, selects the perfect tubes which are then matched for a perfect balance. 

                 

Action
A50Taurus 
  50W Integrated Stereo Amplifier
Two models of stereo tube amplifiers with DAC's on board, guaranteeing exceptional sonic performance from any digital source. Made with the finest materials & advanced technology, this series is a sophisticated blend of research & experience. Designed without compromise for a rich sound & faithful music reproduction.
The A50Taurus provides a minimum of 100 watts (50W per channel), power output from 4, KT88/6550's in Ultra-Linear (UL) - push/pull operation.
The A50Taurus like it's bigger brother also features a newly designed custom output transformer resulting in a rich sound stage but with an authority that belies its 50W.
 
FEATURES 

- USB & S/PDIF input
For the first time we include an onboard 24Bit 192KHz Wolfson DAC for a extraordinary listening experience. 

- DC Powered tube heater
All tubes, except KT88/6550, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum. 

- Output transformer
The Output transformer uses a Hi-Grade Iron-Silicon for superb frequency reproduction & width. With this newly designed custom output transformer unique to the A50Taurus we are able to achieving a highly delicate & precise sound reproduction faithful to the original recording. 

- Mechanical chassis construction
The power supply & output transformers are held by an extremely rigid “H” structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes. 

- Remote control
Featuring a superb CNC machined case it has a soft button design, perfectly matching the aesthetics for the “ACTION” series. 

- Feet
Four CNC machined aluminium feet with an insert of natural rubber. The depth & form of these rubber feet has been calculated to minimise vibrations of the amplifier in isolation from its surroundings. 

- Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.

- Sockets
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement. 

- Components
Components for the A50Taurus have been selected with great care throughout. Only the best available components are considered & all must undergo an exhaustive analysis of their sonic influence prior to final selection. 

- Selected tubes
All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process & at the end of this, selects the perfect tubes which are then matched for a perfect balance. 

                  

Action
 A40Virtus
   40W Integrated Stereo Amplifier

New model of stereo tube amplifiers with DAC's on board, guaranteeing exceptional sonic performance from any digitai source. Made with the finest materials & advanced technology, this series is a sophisticated blend of research & experience. Designed without compromise far a rich sound & faithful music reproduction.
The A40Virtus provides a minimum of 40 watts per channel, power output from a pair of KT66's in Ultra-Linear (UL) - push/pull operation.
The A40Virtus features a newly designed custom output transformer resulting in a rich sound stage but with an authority that belies its 40Wpc.

FEATURES

- USB & S/PDIF input
For the first time we include an onboard 24Bit 192KHz Wolfson DAC for a extraordinary listening experience.

-DC Powered tube heater
Ali tubes, except KT66, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.

- Output transformer
The Output transformer uses a Hi-Grade lron-Silicon for superb frequency reproduction & width. With this newly designed custom output transformer unique to the A40Virtus we are able to achieving a highly delicate & precise sound reproduction faithful to the originai recording.

- Mechanical chassis construction
The power supply & output transformers are held by an extremely rigid "H" structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes.

- Remote control
Featuring a superb CNC machined case it has a soft button design, perfectly matching the aesthetics for the "ACTION" series.

- Feet
Four CNC machined aluminium feet with an insert of natural rubber. The depth & form of these rubber feet has been calculated to minimise vibrations of the amplifier in isolation from its surroundings.

- Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.

- Sockets
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.

- Components
Components for the A40Virtus have been selected with great care throughout. Only the best available components are considered & all must undergo an exhaustive analysis of their sonic influence prior to final selection.

- Selected tubes
All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process & at the end of this, selects the perfect tubes which are then matched for a perfect balance. 

              

 Roma
R510AC
   80W Integrated Stereo Tube Amplifier
There has never been an introductory integrated amplifier with the fit, finish and sound of the ROMA 510AC. At first glance, this stunning amp simply takes your breath away. This high performance amplifiers brings out the best of other components in the system. Created by those obsessed with great sound and for those who love great music. The result is 80 watts of pure pentode output per channel built around a double triode 12AX7 on input and a 12BH7 tube as phase splitter and a pair of KT88/6550 power tubes in push-pull configuration for a detailed, delicate and dynamic sound.
 

FEATURES
 

-DC Powered tube heater
All tubes, except KT88/6550, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.

- Output transformer
The Output transformer uses a Hi-Grade lron-Silicon for superb frequency reproduction & width. With this newly designed custom output transformer we are able to achieving a highly delicate & precise sound reproduction faithful to the originai recording.

- Mechanical chassis construction
The power supply & output transformers are held by an extremely rigid structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes.

- Remote control
It has a soft button design, perfectly matching the aesthetics for the "ROMA" series. It controls volume,mute and sources selection.

- Feet
Four aluminium feet with an insert of strong rubber. These rubber feet has been choise to minimise vibrations of the amplifier in isolation from its surroundings.

- Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.

- Sockets
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.

- Components
Components for the Roma 510AC have been selected with great care throughout. Only the best available components are considered & all must undergo an exhaustive analysis of their sonic influence prior to final selection.

- Selected tubes
All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process & at the end of this, selects the perfect tubes which are then matched for a perfect balance.
 

               

Roma
 R753AC   50W Integrated Stereo Tube Amplifier
There has never been an introductory integrated amplifier with the fit, finish and sound of the ROMA 753AC. At first glance, this stunning amp simply takes your breath away. This high performance amplifiers brings out the best of other components in the system. Created by those obsessed with great sound and for those who love great music.The result is 50 watts of pure pentode output per channel built around a pair of 12AU7 on input/driver tubes and a pair of EL34/6CA7 power tubes in push-pull configuration for a detailed, delicate and dynamic sound.
 

FEATURES
 

-DC Powered tube heater
All tubes, except EL34, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.

- Output transformer
The Output transformer uses a Hi-Grade lron-Silicon for superb frequency reproduction & width. With this newly designed custom output transformer we are able to achieving a highly delicate & precise sound reproduction faithful to the originai recording.

- Mechanical chassis construction
The power supply & output transformers are held by an extremely rigid structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes.

- Remote control
It has a soft button design, perfectly matching the aesthetics for the "ROMA" series. It controls volume,mute and sources selection.

- Feet
Four aluminium feet with an insert of strong rubber. These rubber feet has been choise to minimise vibrations of the amplifier in isolation from its surroundings.

- Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.

- Sockets
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.

- Components
Components for the Roma 753AC have been selected with great care throughout. Only the best available components are considered & all must undergo an exhaustive analysis of their sonic influence prior to final selection.

- Selected tubes
All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process & at the end of this, selects the perfect tubes which are then matched for a perfect balance.
 

                         

Roma
R27AC
   25W Integrated Stereo Tube Amplifier
There has never been an introductory integrated amplifier with the fit, finish and sound of the ROMA 27AC. At first glance, this stunning amp simply takes your breath away. This high performance amplifiers brings out the best of other components in the system. Created by those obsessed with great sound and for those who love great music. The result is 25 watts of pure pentode output per channel built around a double triode 12AX7 on input/phase splitter and a pair of 5881/6L6 power tubes in push-pull configuration for a detailed, delicate and dynamic sound.
FEATURES

-DC Powered tube heater
All tubes, except 5881/6L6, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.

- Output transformer
The Output transformer uses a Hi-Grade lron-Silicon for superb frequency reproduction & width. With this newly designed custom output transformer we are able to achieving a highly delicate & precise sound reproduction faithful to the originai recording.

- Mechanical chassis construction
The power supply & output transformers are held by an extremely rigid structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes.

- Remote control
It has a soft button design, perfectly matching the aesthetics for the "ROMA" series. It controls volume,mute and sources selection.

- Feet
Four feet with an insert of strong rubber. These rubber feet has been choise to minimise vibrations of the amplifier in isolation from its surroundings.

- Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.

- Sockets
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.

- Components
Components for the Roma 27AC have been selected with great care throughout. Only the best available components are considered & all must undergo an exhaustive analysis of their sonic influence prior to final selection.

- Selected tubes
All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process & at the end of this, selects the perfect tubes which are then matched for a perfect balance. 

                   

Roma
R14DC/14DC+
   Tube Compact Disc Player

Synthesis is set to release a new solid state integrated stereo amplifier ROMA81DC+.

The sound is complete, airy, dynamic, lively, and incredibly musical. The purity of human voices and accuracy of instruments is breathtaking.

The Roma81DC+ with its 450W for each channel provides a fast, dynamic presentation without the dryness and sterility of other Class D designs. This is due to the particular configuration of the input stage and the natural sound it develops. Resolution, transparency and detailed sound are above and beyond that which one would expect from an amplifier. The Roma 81DC+ has USB “B” type, DSD 5,6MHz and optical input. 32Bit resolution gives you a fantastic sound stage and beautiful sound reproduction. The Phono Stage combines exceptional sound quality and unique features.
 

                     

Roma
37DC/37DC+  
High power hybrid integrated stereo amplifier

Synthesis is set to release a new hybrid integrated stereo amplifier ROMA37DC+.

The tube like sound is complete, airy, dynamic, lively, and incredibly musical. The purity of human voices and accuracy of instruments is breathtaking. The Roma37DC+ provides a fast, dynamic presentation without the dryness and sterility of other Class D designs. This is due to the 6DJ8 tube input stage and the natural sound of the class D audio module. Resolution, transparency and detailed sound are above and beyond that which one would expect from an amplifier. The Roma37DC+ has USB “B” type, DSD 5,6MHz and optical input. 32Bit resolution gives you a fantastic sound stage and beautiful sound reproduction. The Phono Stage combines exceptional sound quality and unique features.
 

                       

Roma
R 81DC/81DC+
   High power digital integrated stereo amplifier

Synthesis is set to release a new solid state integrated stereo amplifier ROMA81DC+.

The sound is complete, airy, dynamic, lively, and incredibly musical. The purity of human voices and accuracy of instruments is breathtaking.

The Roma81DC+ with its 450W for each channel provides a fast, dynamic presentation without the dryness and sterility of other Class D designs. This is due to the particular configuration of the input stage and the natural sound it develops. Resolution, transparency and detailed sound are above and beyond that which one would expect from an amplifier. The Roma 81DC+ has USB “B” type, DSD 5,6MHz and optical input. 32Bit resolution gives you a fantastic sound stage and beautiful sound reproduction. The Phono Stage combines exceptional sound quality and unique features.
 

                     

Roma
R 54DC/54DC+
   High power hybrid integrated amplifier

Synthesis is set to release a new digital integrated stereo amplifier ROMA54DC+.

The sound is complete, airy, dynamic, lively, and incredibly musical. The purity of human voices and accuracy of instruments is breathtaking. The Roma54DC+ with its 170W each channel provides a fast, dynamic presentation without the dryness and sterility of other Class D designs. This is due to the particular configuration of the input stage and the natural sound it produces. Resolution, transparency and detailed sound are above and beyond that which one would expect from an amplifier. The Roma 54DC+ has USB “B” type, DSD 5,6MHz and optical input. 32Bit resolution gives you a fantastic sound stage and beautiful sound reproduction. The Phono Stage combines exceptional sound quality and unique features.

 

                         

Roma
 R 41DC/41DC+   All tube A class Headphone Amp

 Synthesis is set to release a new headphone amplifier which supplies 2W in a pure class A arrangement using an ECL82/6BM8 in a Single Ended configuration. The Roma 41DC+ has been principally developed to drive high power headphones most coveted by audiophiles for their excellent soundstage. It has line, USB (PCM up 32Bit/384KHz, DSD up to 5,6MHz) and optical inputs as well as an output connection for speakers. The power amp also features a patented adaptive output technology (BLS) that automatically sets the output tap depending on the headphone load.
 

                      

Roma
 R 79DC   Tube phono stage MM-MC

Synthesis is set to release a new tube phono stage, the Roma79DC.

The all important component of this of this line stage comprises of two ECC83/12AX7 and one ECC82/12AU7 are run by a multi stage fully regulated power supply.

To back this up the design has an over size shielded power transformer for reduce the interference. An array high grade metalized polipropilene capacitors controlling the audio signal circuits. The MM input stage uses a low noise JFet with a separate regulated power supply with extensive filtering for reducing the interference and noise. Using an ECC82/12AU7 tube on the output stage, gives this unit a very low output impedance without losing signal.

The Roma79DC has easily selectable capacitors (MM) and impedances (MC) for cartridges by a front mounted knob selector which is also shown on the front LCD display. 

 

 

 

 

 

2010-2011,韵祥影响商行版权所有